The Pedistep fashion orthotics come with Velcro tabs that are applied to the orthotic and your shoes to prevent the orthotic from slipping.
You may not need to use them, but if you do, simply follow these simple steps.
You should then be able to remove the orthotic from the shoe leaving behind the Velcro loop tab.
It’s important to have the softer loop attached to the shoe rather than the hook, it will avoid ruining a pair of stockings if you left your Pedistep fashion orthotics in another pair of shoes.
Step 1
Identify the which half of the Velcro tab is the hook (the firm rough surface) or the loop (the softer fury surface).
Step 2
Take the hook part of the Velcro dot, remove the adhesive backing.
Step 3
Apply the Velcro tab to the bottom of the orthotic at the back, under the heel
Step 4
Apply the loop part of the Velcro to the to the hook part of the Velcro.
Step 5
Now remove the backing to expose the adhesive surface
Step 6
Gently insert the orthotic into the shoe and align the heel of the Pedistep fashion orthotic with the heel of the shoe.
Step 7
Press down firmly on the rear of the orthotic for 10 to 15 seconds.
Step 8
Remove the orthotic, ensuring that the soft loop velcro tab remains in the shoe.
No comment yet, add your voice below!